Dolmar EV-3618 Manuel D'instructions Original page 10

– When crossing surface other
than grass
– When transporting.
• Stop the cutting tool:
– If you have to tilt the
machine
– When crossing
other than grass
– Transporting the machine
to and from surfaces to be
worked.
• Pay attention to the cutting tools.
They do not stop immediately
after switch off.
Maintenance instructions
• Have your machine serviced by
our authorized service center,
always using
replacement
repair and poor maintenance
can shorten the life of the
machine and increase the risk of
accidents.
• Inspect the machine on regular
base.
• Before servicing,
adjustment,
change an
following steps:
– Shut off the power source
– Disconnect
from power supply
– Make sure that all moving
parts have
complete stop
– Allow the machine to cool.
• Inspect on the machine for
possible damage:
– Whether
works
intended function
10
surfaces
only genuine
parts. Incorrect
inspection,
storage, or
accessory,
the machine
come to
safety devices
properly for
– Whether all the moving
parts work smoothly and
adequately
– Whether all parts are not
damaged
installed
– Check the cutting tool for any
damage, worn or unbalance
– Check the grass catcher
regularly for any damage or
worn
– Check all the nuts, bolts and
screws are tight
– Replace or repair by our
authorized service center if
there are any damaged or
worn parts.
• Do not carry out maintenance
or repair work other than that
described in this instruction
manual. Any other work must be
carried out by Dolmar authorized
service center.
• Only
replacement
accessories intended for your
machine. Otherwise it may result
to
in personal injury or damage on
take
the machine.
• Store the machine in a dry room.
Keep it out of reach of children.
Never
outdoors.
Vibration
a
• People with poor circulation who are exposed to
excessive vibration may experience injury to blood
vessels or the nervous system. Vibration may cause
the following symptoms to occur in the fingers, hands
or wrists: "Falling asleep" (numbness), tingling, pain,
stabbing sensation, alteration of skin color or of the
skin. If any of these symptoms occur, see a physician.
• To reduce the risk of "white finger disease", keep your
hands warm during operation and well maintain the
its
equipment and accessories.
and
use original
parts
store the
properly
Dolmar
and
machine