The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
Make sure that the power cable is undamaged and has not been installed under the
oven or over hot or sharp surfaces.
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
15 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
15.1 Complete overview
A
SEAL For sealing the bag without vacuum.
B
Indicator lamp (for seal) indicate the seal process.
C
CANCEL For switch off the vacuuming and sealing action whenever the operator
wants to stop the operation.
D
Indicator lamp (Power) indicate that the power plug is
inserted.
F
Indicator lamp (for vacuum) indicate the vacuum process.
E
VACUUM & SEAL For draw air out of the bag and
automatically change operation to seal the bag after vacuum is
completed.
Cover-lock To lock the cover. On the left side and right side of the
cover there is a key-press.
G
Cover-unlock Press to unlock the cover.
31