Publicité
Les langues disponibles
Les langues disponibles
O
C
VEN
OOKING
Control Panel
A B
The control panel is designed for ease in programming. The display window shows options for each function and moves from step
to step through the programming process. In double ovens, Upper Oven or Lower Oven is displayed to indicate which oven is being
programmed. Control panel features vary by model. Oven display above is a double oven programmed for bake and broil operations.
A
Function pads
Use to program the lower oven for
Lower oven
double wall ovens.
B
Function pads
Use to program the upper oven for
Upper oven
single and double wall ovens.
C
Quickset Pads Use to select options in display
window (next to display window on
both sides).
D
Display
Displays oven functions, options and
window
time of day.
E
Favorites
Use to access, program or save
baking cycles.
F
Help
Press for on-screen help.
G
Setup
Use to view or change factory default
settings.
H
Number pads
Use to enter time and temperature,
or to enter Favorites names.
Quickset Pads
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset pad next to the word.
If you need to back out of a function or option in the display,
press the Back pad. When your programming is complete,
press the Enter pad or wait four seconds and the function will
start automatically.
C
D
4
E F
Up or Down arrows indicate additional screens with additional
options. Press the Quickset pads next to the arrows to scroll
through the display.
Note: Four seconds after entering the function, option,
number or letter, the function will automatically be en-
tered. If more than 30 seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
Clock
Setting the Clock:
1. Press the Setup pad.
2. Select Clock using the Quickset pads.
3. Select Time.
4. Enter the time using the number pads.
5. Press Enter.
6. Select AM or PM in 12 hour mode. (For 24 hour clock, see
page 5.)
7. Select Set.
8. To exit the Setup mode, press Setup.
G
H
Publicité
