brennenstuhl TORAN 3000 MB Mode D'emploi page 8

RESETTING THE BLUETOOTH FUNCTION AT THE DEVICE
If a TORAN floodlight is connected to a smartphone, no other smartphone can access the same
floodlight. The floodlight will also retain its settings if the smartphone is out of reach.
If in this situation, a different user wants to use the floodlight by means of the app, they can reset
the connections and settings of different users by keeping the blue Bluetooth button pressed for
more than 5 sec.
SWITCHING THE FLOODLIGHT ON/OFF MANUALLY
Switch the floodlight on by means of the yellow button at the back side.
The floodlight lights with 100 % brightness. By pressing the button again, the light will change
to 50 % brightness. The light intensity can also be continuously set. To do so, keep the switch
pressed – the light intensity is slowly reduced.
Proceed in the same way to increase the intensity again.
If the switch is left in any of its "on" positions for longer than 3 seconds, then pressing it once
again will always turn it off.
A: On/Off and function switch
B: Connection cable
C: Power socket (only TORAN 500X MB)
D: Bluetooth switch
E: Bluetooth status LED
MAINTENANCE
The light source of this lamp cannot be replaced; if the light source has reached the end of its
service life, the entire lamp has to be replaced.
CLEANING
Do not use solvents, caustic cleaning agents or similar products. Only use a dry or slightly
moistened cloth for cleaning.
8
18P126 Mobiler Bluetooth LED Strahler Toran 3000_5000_5001_5002MB 190819.indd 8
TORAN 3000 MB 5000 MB 5001 MB 5002 MB
E
D
C
A
B
19.08.2019 13:54:52