Miele PWM 514 Mode D'emploi page 131

Masks programmes
Masks are programmes for washing and disinfecting breathing masks with head straps.
Put the head bands over the masks to protect the visors before loading the machine.

Put each mask into its own protective bag and fasten it.

The protective bags are available to order from the Miele Customer Service Department.
Remove the masks from the bags after reprocessing.

Spin damp, empty protective bags using the Spin wash bags programme.

Masks
Load
Programme se-
quence
Extras
Masks with pre-wash
Load
Programme se-
quence
Extras
Spin wash bags
Load
Programme se-
quence
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time and dispensing
quantities) must be set on site to suit cleaning agents and disinfectants.
To avoid recontamination, the water for the rinse cycles in the disinfection programmes is
not supplied via the detergent drawer.
Do not wash masks with connections for helmet-mask combinations.
The clasps are likely to scratch visors.
Use a suitable detergent. Observe the manufacturer's instructions.
60 °C
Breathing masks with head straps
Disinfection* 60 °C, holding time 20 min
4 rinse cycles (optional disinfection rinse can be
activated), drainage
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
60 °C
For heavily soiled breathing masks with head
straps
Pre-cleaning 30 °C
Disinfection* 60 °C, holding time 20 min
4 rinse cycles (optional disinfection rinse can be
activated), drainage
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
Mask bags
Spin
en - Programme summary
Load ratio/Load
size
PWM 514 –
12 masks
PWM 520 –
15 masks
1:20
131