Miele PWM 514 Mode D'emploi page 120

en - Programme summary
Mops thermal disinfection
Fabric
Programme se-
quence
Extras
Mops thermal disinf + rtu
Fabric
Programme se-
quence
Extras
120
90 °C
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse
2nd pre-rinse can be activated via extra  "Pre-
rinse"
Disinfection 90 °C, holding time 10 min
Cool down and/or disinfection rinse can be activ-
ated in the Miele Benchmark Programming Tool
3 rinse cycles
Final spin
Pre-rinse, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
90 °C
Cotton, viscose, polyester and microfibre mops
Same programme sequence as Mops thermal
disinfection
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-rinse, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
Load ratio/Load
size
1:9
PWM 514 – 14 kg
PWM 520 – 20 kg
For number,
see
"Mops load size"
chart