Miele PWM 514 Mode D'emploi page 123

The Mops rtu programme is suitable for the subsequent finishing of clean and dry mops.
A disinfecting agent is applied during finishing.
The dispensing quantities must be set on site and the standard of disinfection must be
checked.
Mop load size (cotton) applies to the load ratio 1:9
Mop size/ 40 cm
weight 190 g/
mop
PWM 514 74
PWM 520 105
Tip: When using microfibre mops, the load size is higher due to the lower mop weight.
Mop load size (microfibre) applies to the load ratio 1:9
Mop size/weight
PWM 514
PWM 520
A reduced number may apply to particularly high-volume, light-weight mops.
50 cm 60 cm
220 g/ 280 g/
mop mop
64 50
91 71
40 cm
120 g/mop
117
167
en - Programme summary
80 cm 110 cm
360 g/ 510 g/
mop mop
39 28
56 39
130 cm 160 cm
610 g/ 720 g/
mop mop
23 19
33 28
50 cm
170 g/mop
82
118
123