Miele PWM 514 Mode D'emploi page 126

en - Programme summary
Cloths therm. disinfection
Fabric
Programme se-
quence
Extras
Cloths therm. disinf + rtu
Fabric
Programme se-
quence
Extras
Cloths ch-th disinf 10 min
Fabric
Programme se-
quence
Extras
126
90 °C
Cotton, viscose, polyester and microfibre clean-
ing cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 90 °C, holding time 10 min
Cool down and/or disinfection rinse can be activ-
ated in the Miele Benchmark Programming Tool
3 rinse cycles
Final spin
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
90 °C
Cotton, viscose, polyester and microfibre clean-
ing cloths
Same programme sequence as Cloths thermal
disinfection
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Fill stop,
Rinse hold
70 °C
Cotton, viscose, polyester and microfibre clean-
ing cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 70 °C, holding time 10 min
3 rinse cycles (optional disinfection rinse can be
activated)
Final spin
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
Load ratio/Load
size
1:18
PWM 514 – 7 kg
PWM 520 – 10 kg
For number,
see
"Cleaning cloths
load size" chart