TFK carrycot T-44-12 Notice D'utilisation page 10

- (pic.VIII) Stick the rear carrycot tube (13) (T-00/089) next to
the plastic part over the vertical frame tube in the middle.
Now swing it to the fixation (14) at the left vertical frame tube,
it will lock automatically (audibly).
- (Fig. IX) Now you can push the carrycot onto the two tubes
(11 + 13) from the front. First fix the clamps (15) onto the cot's
rear tube (13) (T-00/089) and then use the front two
clamps (16) to press the carrycot down onto the cot's front
tube (11) (T-00/089) from above. The clamps will lock
automatically. To remove the cot, pull on the front metal clip
(4, Fig. III) underneath the cot, then pull the cot towards you
and off the frame.
2. Use with two carrycots
- (pic.X) Remove the seat covers, belly frame and the
canopies (Please have a look to the instruction of the Twinner
Twist Duo). Bring the front carrycot tube (17) (T-00/088) in
position next to the pushbuttons left and right at the frame and
push the clip at the frame tube in the middle, till it is fixed.
Close the bars at the left and right end of the carrycot tube.
- (pic.XI) Plug the rear carrycot tube (18) (T-00/088) first in the
fixation (14) at the left vertical frame tube. After that place it
with the clip over the frame tube in the middle and the right
end of the tube to the fixation at the right vertical frame tube.
Push it till it is audiable secured. Now you can fix the carrycots
like it is described in pic.IX. Take off the carrycot tubes
- (pic.XII) To remove the carrycot tube in front (11 + 17) (T-
00/088 + T-00/089) open the locks at the tube ends and pull it
off. To remove the rear carrycot tube (13 + 18) (T-00/088 + T-
00/089), open the bar (14) at the tube end in the direction of
the arrow and pull it towards you. Now you can fix the seat
covers, canopies and the belly frame.