Publicité
Les langues disponibles
Les langues disponibles
EN
Use (1) M4x10mm x 6 to secure the
3
(L) front steering iron to the car front
bumper, tighten with a screwdriver.
L
Use (2) M4x14mm x 8 to secure the (B) front steering iron to
4
the handlebars.
M4 x 14mm x 8 SCREW
12
Use the provided
plastic wrench to
attach the nuts.
1. Slide a (4) M10 washer onto the front axle.
5
2. Slide a normal wheel onto the front axle.
3. Slide a (4) M10 washer onto the front axle.
4. Tighten a lock (3) nut to the end of the front axle.
5. Insert (E) hubcap onto the (O) driving wheel. Repeat step
for the other front wheel.
1. Remove direction dish screw and (F) steering wheel.
6
2. Plug connectors.
3. Place (F) steering wheel back onto turning shaft and
tighten with screw and nut.
Use the provided
plastic wrench to
attach the nuts.
EN
Use the provided
plastic wrench to
attach the nuts.
13
Publicité
