Publicité
Les langues disponibles
Les langues disponibles
EN
CHARGING INSTRUCTIONS AND WARNINGS
● ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
● This product comes with charging protection. When charging, all
functions will be cut off.
1. The POWER SWITCH must be in the OFF position when charging.
2. Prior to first-time use,charge the battery for 4-6 hours. Do not
charge the battery for more than 10 hours in order to avoid
overheating the charger.
3. When the vehicle is moving slower than usual, charge the
battery.
4. After each use or once a month (at the minimum), the charge
time will be 8-12 hours and (20 hours at most).
5. Only use the rechargeable battery and charger included with
your vehicle. NEVER substitute the battery or charger with another
brand. Using another battery or charger may start a fire or
explosion.
6. Do not use the included battery or charger with any other
product.
7. Plug the charger port into the input socket (below the tipping
bucket).
8. Plug the charging plug into a wall outlet The battery will begin to
charge.
18
CARING FOR YOUR RIDE-ON
● Park the vehicle indoors or cover it with a tarp to protect it from
wet weather.
● Do not leave the vehicle in the sun for long periods of time, or
fading may occur. Store it in shade or cover with a tarp.
● Do not wash the vehicle with a hose.
● Do not wash the vehicle with soap.
Troubleshooting Guide
Trouble type
How to check it
1. Is it caused by the
overload fuse? (fuse is in
the box under the seat)
2. Is the clutch paddle
well connected?
3. Are the wires welded
well on the ends of
The motor
motor?
doesn't work
4. Take apart the plug-in
of the motor and connect
with the battery directly?
1. Check the forward/
backward switch with a
muti meter and see if it
is normal?
The motor
2. Does the driving
doesn't work
circuit board connect well
with forward/ backward
switch?
EN
How to solve
lf yes, change a new fuse.
There is a spare one in the
fuse box.
lf not, contact the seller for
new motors.
lf not, weld well.
lf yes, check the next.
If still not working, change
the motor.
lf working, driving circuit
board needs professional
repair, please contact with
your supplier.
lf not, change the switch.
If yes, check the next.
If not, connect the wires well.
lf yes, the driving circuit
board is broken, contact with
your supplier.
19
Publicité
