SICK GTB20 Manuel D'instructions page 25

2 Safety information
2.1 General safety notes
2.2 Intended use
2.3 EMC statement
8026846.1K1C/2023/06/07 | SICK
Subject to change without notice
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The GTB20 is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects, animals, and persons.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
Only Gxx20x-QKxxxxF, Gxx20x-QKxxxxG:
This device is compliant with Class A. In a residential environment this equipment may
cause radio interference, in which case the user may be required to take adequate
measures.
OPERATING INSTRUCTIONS
O P E R A T I N G I N S T R U C T I O N S | GTB20
en
25