Antari Fazer Z Serie Mode D'emploi page 7

Volume
Set the output volume from 1 to 100%
Out 100%
Fan
Set the output volume from 1 to 100%
Out 100%
DMX512
Set the DMX address from 1 to 511
Add. 511
DMX Mode
Set the DMX mode Sync, 1Ch or 2Ch
1Ch
Wireless
Turn On or Off wireless control
OFF
Quick
Turn On/Off run last setting function
Start OFF
Remote Control Operation (Optional)
To operate the machine by remote control, connect the remote to the microphone jack
located on the rear of the machine. Use the switch to turn wind on/off, and use the rotary
knob to adjust the output volume from 0~100%.
WTR-20 Wireless Operation (Optional)
The wireless remote control system W-2 consists of a transmitter equipped with four buttons
to turn faze output on or off, and adjust the output volume; with an onboard receiver attached
All manuals and user guides at all-guides.com
7