Antari Fazer Z Serie Mode D'emploi page 5

Product Overview
Setting Up
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm
of open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to a suitably rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximately 1.5
mintues. Once the machine has reached operating temperature, the LCD display will show
"Ready to Faze". Now the machine is ready for operation.
Step 5: To start making haze, locate the Volume button on the control panel, and press the
button to start making faze.
Step 6: To turn off the machine, press the Stop button and put the power switch to the OFF
position.
All manuals and user guides at all-guides.com
5
Wireless Operation (Optional)
Wire Remote Sock
LCD display Control Panel
Fan Speed Adjustment Knob
Output Level Adjustment Knob
XLR 3-Pin DMX Connector
XLR 5-Pin DMX Connector
Power Inlet
Main Power Switch