Black & Decker SB2200 Traduction Des Instructions D'origine page 6

ENGLISH
Features
This tool may include some or all of the
following features
Feature SB2200 SB3200 SB3220 SB3240
1. On/Off switch
2. Motor housing
3. Stainless steel
stem
4. Plastic stem
5. All purpose
cutting blade
6. Whisk
attachment
7. Measuring cup
8. Attachment
connector
9. Measuring jug
10. Ice chopping
blade
11. Chopping
blade
12. Blade
mounting base
13. Gearbox
14. Lid/Base
15. Ice chopping
bowl
Unpacking
• Remove all packaging from the
appliance.
• Clean the appliance before first use.
Assembly
Warning! Before assembly, make sure that
the appliance is switched o and
unplugged.
6
All manuals and user guides at all-guides.com
(Original instructions)
Fitting and removing an attachment (Fig.1)
• Use the blending attachment (3 or 4) for
• Use the whisk attachment (6) for mixing,
• Use the chopping blade (11), Measuring
• Use the ice chopping blade (15),
Use
Blending
• Place the ingredients into a measuring jug
• Using a stabbing motion, push the blades
• When blending liquids or fluid
• Keeping the blades (3 or 4) submerged
Mixing
• Place the ingredients into a measuring jug
• Mix the ingredients until the correct
• Keeping the beater submerged will help
Chopping (Fig. 2)
Warning! The measuring jug (9) must be
used with the chopping blade (11). Do not
use the chopping blade with any other bowl.
Do not use the chopping Blade without the
supplied measuring bowl fitted.
blending liquids or mashing solids.
beating, whipping and creaming liquids.
jug (9), blade mounting base (12) and
blade housing (13) for chopping
vegetables etc.
Measuring jug (9), Ice chopping bowl (12)
and blade housing (13) for chopping ice
etc.
or a suitable container.
(3 or 4) into the ingredients until the
correct consistency is reached.
ingredients, use short pulses to prevent
spillages.
will help to prevent spillages. Take extra
care when blending hot ingredients.
or a suitable container.
consistency is reached.
to prevent spillages. Take extra care when
mixing hot ingredients.