Publicité
Janome Sewist 509 Instruction Manual
z
w
r
t
i
x
t
c
o
!0
v
www.aaasewing.com
All manuals and user guides at all-guides.com
To sew
q
z Attach zipper foot with the right side pin.
e
y
u
x Place zipper teeth next to margin edge and baste the
e
c Stop the machine 2" (5 cm) before reaching the
v Remove fabric and close zipper. Take the upper
o
!1
!2
50
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8"
(0.4 cm) margin of fabric.
q Lower layer
w End of the opening
e Zipper teeth
r 1/8" (0.4 cm) margin
t Upper layer
y Opening size
u Folded edge
i Basting
zipper tape to the lower fabric layer.
Align zipper foot with margin edge. Return thread
tension and stitch length to original settings.
Sew a seam the entire length of zipper tape.
slide with the needle in the fabric. Raise the foot.
Unzip the zipper a few inches to clear a path for
stitching.
o Slider
!0 2" (5 cm)
fabric layer and lay it flat over the zipper.
Baste the zipper tape to the upper fabric layer.
!1 Basting
!2 Zipper tape
Sewist 509 Owners Manual/ User Guide
Publicité
