Publicité
Les langues disponibles
Les langues disponibles
Step 6
Replace the optional 500-sheet tray
pickup rollers and feed roller
Note
If no optional 500-sheet tray is installed in the printer, skip this step and
go to "Replace the fuser" on page 22.
Remove the 500-sheet tray from the feeder and set the feeder upside
down on the work surface.
Feed roller removal
Pinch the feed roller tab (Figure 12, item 1), and then slide the roller
off of the shaft.
Figure 12
Removing the optional 500-sheet tray feed roller
18
Installing the printer maintenance kit
All manuals and user guides at all-guides.com
ENWW
Publicité
