Publicité
Les langues disponibles
Les langues disponibles
4
Figure 8
Removing the Tray 1 separation pad (inside top of the printer)
5
6
Note
Make sure that the locking tab is engaged by trying to move the roller
to the right.
14
Installing the printer maintenance kit
All manuals and user guides at all-guides.com
With the other hand inside the printer, remove the separation pad
(Figure 8, item 1).
With the silver clip facing the front of the printer, firmly press the
new separation pad into the holder until it clicks into place.
Install the new Tray 1 pickup roller.
a. Orient the roller so that the thumb grip (Figure 6, item 2) is on
the left.
b. Insert the roller onto the shaft, and then slide the roller to the
right until it is seated.
c. Slide the roller and cam to the left until it clicks into place.
ENWW
Publicité
