Télécharger Imprimer la page

Gima OXY-6 Instructions Et Entretien page 17

Masquer les pouces Voir aussi pour OXY-6:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
All manuals and user guides at all-guides.com
1.2 Warnings
1.3 Attentions
2. Overview
The pulse oxygen saturation is the percentage of HbO2 in the total Hb of
the blood, so-called the O2 concentration in the blood. It is an important
bio-parameter to the respiration. Many of the respiration disease will
cause hypoxemia, even endanger the patient's health. As a result, monitoring
the SpO2 is indispensable in the clinical rescuing. The traditional method
to measure SpO2 is to analyze the sample of the patient's blood, so can
get the partial pressure of oxygen and calculate the SpO2 by use the
blood-gas analyzer. This method is inconvenient and can not be used to
monitor continuously. For the purpose of measuring the SpO2 more easily
ENGLISH
- Explosive hazard—DO NOT use the oximeter in environment
with inflammable gas such as some ignitable anesthetic
agents.
- DO NOT use the oximeter while the testee measured by
MRI and CT
- To dispose the device, the local law must be followed.
- Keep the oximeter away from dust, vibration, corrosive
substances, explosive materials, high temperature and
moisture.
- If the oximeter gets wet, please stop operating it. When it is
carried from cold environment to warm and humid
environment, please do not use it immediately.
- DO NOT press the keys on front panel with sharp materials.
- High temperature or high pressure steam disinfection to the
oximeter is not permitted. Refer to User's Manual for
instructions of cleaning and disinfection.
- DO NOT have the oximeter immerged in liquid. When it
needs cleaning, please wipe its surface with disinfect solution
by soft material. Do not spray any liquid on the device directly.
14

Publicité

loading