Maytag MDB7759AWS4 Instructions D'installation page 7

INSTALLATION INSTRUCTIONS
Xe
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
| 1 | Disconnect power }
dl
Disconnect electrical power at the fuse box or.circuit
breaker. box-before installing dishwasher.
[5 Shut off water supply — }
Shut off the water supply to the dishwasher. |
Do you already have utility
hookups?
Yes —Follow instructions in the "Prepare Cabinet
Opening—Existing Utilities" section.
No —Follow instructions in the "Prepare Cabinet
Opening—New Utilities" section.
- Existing utility hookups /No existing utility hookups
|
Water line
WS
Check water and electrical
placement
i
Water line
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening—
New Utilities" section.
Prepare Cabinel Openin«
Prepare and route the electrical supply
What type of electrical
connection will you use?
5 _ Power Supply. Cord:
~ Follow. Option A instructions
Direct Wire:
. Follow Option B-instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet next
to the dishwasher cabinet opening.
SS .
Optional location
oN
SN
Preferred location
Drill a 1%" (3.8 cm) hole in cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.