Publicité
Les langues disponibles
Les langues disponibles
Note: If the Power Mode option is enabled (Standard mode), the display will switch into standby mode when the Standby-
Off button is pressed.
To access Power Up Mode, go to Display Settings > Signage Settings > Power Up Settings.
To access Standby Mode LED, go to Display Settings > System Settings > More.
Turn the Display OFF
Flip the power switch on the display to the OFF position. The display will switch off. To power down the display
completely, unplug the power cord from the power supply.
1
2
3
Power LED Status
LED OFF
LED ON
LED flashing (slow)
LED flashing (fast)
INITIAL SETUP
Follow the on-screen instructions to setup your display. The installation wizard will guide you through the setup process.
Note: The last screen of the installation wizard will be the OTA mode screen, select "Disabled" then your settings will be saved.
1. Language
Select the desired language from the list and press OK.
2. Country
Select your country from the list and press OK.
3. Signage Settings
Set ID, OSD Orientation and NTP server options can be configured using this menu. Model name, Serial number,
and Software version are for information only. Save this information to a USB storage device using Save model
information. You can also copy database files from a USB storage device to the display using Clone from USB.
Refer to Signage Settings for more information on the options in this menu. After the settings are completed,
highlight Next and press OK.
4. Auto Launch
Set your Auto Launch preference for the display: Disabled, HTML5 CMS Launcher, Open Browser, VsignLite, Select
Source, or Select Application. For Select Source and Select Application you will have to set the available source or
application of your choice. You can change your preference at any time using the Auto Launch option in Display
Settings > Signage Settings > Power Up Settings.
BACK OF DISPLAY
3
4
Status of the Display
Power ON (operating mode)
Power OFF (standby mode, quick standby mode)
Turning on or OFF
Software update
English - 8 -
1.
Standby-On Button
2.
Standby-Off Button
Power Switch (*)
3.
4.
Control Button
4
Publicité
