Publicité
Les langues disponibles
Les langues disponibles
When installing the product within a recessed wall, allow at least the space specified above
between the product and wall for ventilation and ensure that the ambient temperature is
kept between 0ºC-40ºC.
The manufacturer is not responsible for any damages or failures caused by improper use
or installation of this product.
VESA MEASUREMENTS
Size
75"
TURNING THE DISPLAY ON/OFF
IMPORTANT
: The display is designed to operate with a 110-240VAC, 50/60 Hz power supply.
Turn the Display ON
•
Before plugging in the display, connect the external IR receiver to the IR input on the display.
•
Plug the female end of the provided power cord into the power inlet on the back of the display (AC IN)
and plug the male end of the power cord into the power supply.
•
Turn on the power switch on the display, located on the back, bottom right of the unit. The display will
switch into standby mode and the power LED will go on.
•
Press the Standby-On button or the Control button on the display.
Connecting the External IR Receiver
•
Before plugging the display into the power outlet, connect the supplied IR receiver to the IR input on the
display. Place the IR receiver in sight of your own remote control. Simply operate your remote control
while it is pointed at the IR receiver and it will relay the control signal to your display.
Standby Mode
•
Press and hold the Standby-Off button on the remote control. The power off dialogue will appear on
the screen.
•
Highlight OK and press the OK button. The display will switch into Standby Mode.
Quick Standby Mode
•
Press the Standby-Off button on the remote control or press the control button on the display (while
Home Screen is displayed).
•
To return to operating mode, press the button again.
W
H
600mm
400mm
English - 7 -
W
H
Length (X)
Thread (Y)
min/max
7-10mm
M8
Publicité
