Publicité
Les langues disponibles
Les langues disponibles
CONTROLLING WITH A PC
You can control the display from an external PC via the RS-232 (COM port) or LAN (Ethernet port) connected
to the PC.
Required Equipment
•
RS-232 (3.5mm) to RS-232 (male) cable or LAN cable (connected via router)
•
USB to RS-232 (female) adapter
•
Laptop or PC which has USB or LAN port
•
Installed program on remote PC or laptop to send commands
In general, the commands are sent for operating the implemented functions via serial or LAN port and utility.
A suitable utility can be used such as described below.
RS-232 Connection
Run the software and select Serial as Connection Type. Enter the display's serial port in the field Serial Line
•
(in the following example it is COM4) and "115200" in the field Speed. Then click the Open button.
1. RS-232 Input Port (3.5mm)
2. RS-232 to 3.5mm serial cable
(commercially available)
3. To COM port
4. RS-232 to USB adapter
5. PC
English - 22 -
Publicité
