Publicité
Les langues disponibles
Les langues disponibles
GETDNS2
GETINTERNETSPEED
SETPROXY
GETPROXY
CLEARPROXY
Command
SETOSDORIENTATION
GETOSDORIENTATION
SETOPSPOWER
GETOPSPOWER
SETOPSALWAYSON
Command
SETBACKLIGHT
SETBACKLIGHTLEVEL
GETBACKLIGHTLEVEL
COLOURTEMP
get DNS server 2 (eg.
GETDNS2)
get internet speed
Sets proxy configuration
Gets proxy configuration
Clears proxy configuration
PC COMMANDS
Description
Set OSD orientation
Get OSD orientation
Set OPS power status
Get OPS power status
Set OPS Always on value
PICTURE COMMANDS
Description
Set backlight pin status.
Set backlight level.
Get backlight level.
Set colour temperature.
English - 40 -
no parameter
no parameter
string (nnn.nnn.nnn.nnn:nnnn)
no parameter
no parameter
Parameter
string-integer n ( n =
landscape )
no parameter
string parameter "on" or "off"
no parameter
string parameter "true" or
"false"
Parameter
str-int n (n = ON, n = OFF)
int n (0 ≤ n ≤ 100)
no parameter
str-int n (n = normal, warm,
cool)
#*DNS server 2 is nnn.nnn.
nnn.nnn
#*The internet speed is ...
Mbps
#*addr = nnn.nnn.nnn.nnn, port
= nnnn
#*Current proxy is nnn.nnn.
nnn.nnn:nnnn
or
#*No proxy address
#*Proxy was cleaned
Return
#*Wrong parameter entered
(landscape)
or
#*The OSD orientation set OK
or
#*The OSD orientation set NOK
#*The OSD orientation ...
#*Turning OPS on
#*Turning OPS off
#*The OPS is already on
#*The OPS is already off
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered
#*The OPS is on
#*The OPS is off
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered
#*The OPS is not enabled
#*OPS Always on set as true
#*OPS Always on set as false
Return
#*setBacklight port to ON
or
#*setBacklight port to OFF
#*Backlight level set to n
or
#*NACK
#*The backlight level is ...
#*setColourTemp() set to n
Publicité
