Publicité
Les langues disponibles
Les langues disponibles
SIGNAGE SETTINGS
1. Device Info
•
View and save device information, including Device ID, Software Version, Serial Number, Model Name
and Display Lifetime.
•
Set Device ID and update Software Version.
2. Controls
View and adjust settings for Pixel Burn-In, No Signal, No Signal Delay, No Signal Power Off, No Signal Timer,
Panel Lock, RCU Inhibit, UART0 or UART1 (universal asynchronous receiver/transmitters)
3. Power Up Settings
Includes settings: Power Up Mode, Power Mode, Power On Delay, Auto Launch and HDMI Wake Up Enabled
4. USB
•
Clone to USB: Copy files from the display to a connected USB device.
•
Clone from USB: Copy files from a connected USB device to the display.
•
USB Operations: Highlight and press OK to perform USB operations.
•
USB Information:
•
View current usage and available space of the connected USB device.
•
Format the connected USB device using the Format Disk option in this menu to extend the
storage
will only be usable with the display.
•
IMPORTANT: Formatting your USB storage device will erase ALL data on it and its file system will
be
•
Safely Remove: Safely remove the USB device. Highlight this option and press OK. Wait for the message
to be displayed on the screen. Then remove your device.
5. Scheduler Settings
Set the display to automatically turn ON and OFF at defined time intervals on desired days. Save up to 4
different schedules:
1.
Select the desired plan (or schedule) and press the OK button.
2.
Define the times for the display to be turned ON automatically. Highlight OK and press the OK button again
when you are done. Perform the same steps to set a time for the display to turn OFF automatically.
3.
Define the days for your plan to be active. Highlight the desired day/s and press OK to select. The plan will
be active on the selected days of the week.
4.
Define a source for your plan. Highlight the desired source and press the OK button.
•
If Last Source is selected, the input source will not be changed at power-up.
•
If USB is selected, media files on the connected USB device will automatically play as described
in the USB Auto Play Feature section.
Alternately, choose Select Application. Highlight the application of your choice and press OK to select.
You can also set backlight on and off values for your plan. These values will be used to adjust the backlight
of the display at the beginning and end of the plan. If the source option is set to Last Source, backlight settings
will be applied to all sources; if not, settings will be applied to the selected source only.
Use Plan Enable to enable or disable the current plan (or schedule). When the plan is enabled, the Save option
will appear on the plan setting screen. Highlight and press OK to save settings.
6. Link Options
To change start and settings URLs:
1.
Create a file named "starturl.txt" or "settingsurl.txt" in the root directory of any USB storage device.
Make sure that the extension is "txt".
2.
Open this file with a text editor software such as Notepad.
converted to FAT32.
capacity of your display. After formatting, the device
English - 13 -
Publicité
