Publicité
Les langues disponibles
Les langues disponibles
Product Set Up
Open Stroller
1
- Open the storage latch as shown.
2
- Rotate the handle to the rear of the stroller. A "click"
sound means the stroller frame is open completely.
Check that the stroller is completely latched open before
continuing.
Front Wheels
3
- Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely.
Check the wheel is securely attached by pulling out.
Repeat on opposite side.
4
- To remove the front wheel, slide the release button out
(1) and then detach the front wheel from the front leg (2).
Brake Assembly
Make sure the brake lever is up before attaching the brake
assembly to the frame.
5
- Push the brake assembly onto the rear leg tubes.
A "click" sound means the brake assembly is attached.
Check that brake assembly is securely attached by
pulling on it.
12
TAVO trvl System instructions
1
2
3
click
4
1
2
5
click
TAVO trvl System instructions
13
Publicité
