Publicité
Les langues disponibles
Les langues disponibles
1
1
86
BEEP
SPE-ANA
DEMO
BEEP
SPE-ANA
DEMO
Other Useful
Features
Displaying Spectrum
Analyzer
If an audio processor equipped with the
spectrum analyzer function is connected to the
CVA-1000R, you can see the spectrum
analyzer screen.
Display the System cont. screen and press the
F2 (SPE-ANA) button. You can select one of
two colour patterns.
Each press changes the modes as follows:
→ SPE-ANA ON A → SPE-ANA ON B
SPE-ANA OFF ←
If the AUX1 (NAV.) or AUX2 mode is turned on,
the unit cannot display the Spectrum Analizer
screen.
Turning Guide Beep
Sound On and Off
When the guide beep sound mode is on and
any button is pressed, the monitor produces a
beep sound to acknowledge the receipt of the
command when a button/switch on the monitor
is pressed.
Display the System cont. screen and press the
F1 (BEEP) button. Each press toggles between
the beep ON and OFF modes. When the beep
ON mode is turned on, the display shows
"BEEP ON" and the monitor produces a beep
sound when any button is pressed.
English
Publicité
