Alpine CVA-1000R Mode D'emploi page 29

5
1 MONO
2
AF
4 T.INFO
5 PTY
5 P.PTY
6
7
1 MONO
2 AF
4 T.INFO
5 PTY
5 P.PTY
RDS Operation
Press the F2 (AF) button to activate the RDS
mode.
Turn the rotary switch to the right or left to
select the desired RDS station.
Note: When the RDS station signal received
has become weak, press and hold the
F2 (AF) button for at least 2 seconds.
The unit automatically searches for the
strongest RDS station in the AF list.
To end the RDS reception mode, press the F2
(AF) button again.
Note:
You can also set the RDS reception mode in
other source modes as follows:
1. Press and hold the SET UP button for at
least 2 seconds.
The RDS setting screen appears in the
display.
2. Press the F1 (AF) button.
Each press toggles between the RDS on and
off modes.
3. To end the RDS setting mode, press the SET
UP button.
Tips
The RDS digital data includes the followings:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequecncies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
English English
29