Hilti DC-EX 125/5"M Mode D'emploi Original page 13

▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Hood
Generation:
Serial no.:
2 Safety
2.1 Safety instructions
WARNING! Read all safety precautions and instructions in this documentation and the safety
instructions of the approved tools. Failure to follow the safety instructions and other instructions can result
in electric shock, fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
▶ Wear personal protective equipment and always wear protective goggles.
▶ Use respiratory protection to keep residual dust away from the face and airways when working.
▶ Even when the hood is fitted, always use the side handle of the approved Hilti power tool.
▶ Wear protective gloves when changing the accessory tool.
3 Description
3.1 Product overview
3.2 Slitting adapter set (accessory)
Spacing adapter
Q
3 mm spacing washer
W
*267722*
1
2
267722
DC-EX 125/5"M
01
Connector
@
Locking catch
;
Front clip
=
Carriage plate with cutting line indicator
%
Catch
&
Carriage plate
(
Wheels
)
Cover
+
Direction-of-rotation arrow
§
Side-handle attachment point
/
Back panel
:
Carriage plate
∙
Positioning mark for fitting to angle grinder
$
Depth gauge scale
£
Locking screw
|
Direction of rotation indicator for positioning
¡
the angle grinder
6 mm spacing washer
E
Break-out tool
R
English 7