Triangle BOREA CONNECT Serie Mode D'emploi page 36

EN
BASS AND TREBLE ADJUSTMENTS
Your BOREA Connect speakers have an equalizer that enables you to adjust the low and high
frequencies as you like.
Adjusting the amount of bass
With the «Bass +» and «Bass –» buttons on the remote control, you have access to 15 positions in
2dB steps over a range between 30 and 500Hz. The default setting is 0dB.
The low-frequency output will increase or decrease each time the remote control is pressed.
Adjusting the amount of treble
With the «Treble +» and «Treble –» buttons on the remote control, you have access to 15 positions
in 2dB steps over a range between 1000 and 20kHz. The default setting is 0dB. The high-frequency
output will increase or decrease each time the remote control is pressed.
When the speaker goes on standby, the settings will be stored for the next use. To restore the
factory presets, you just need to press the «EQ RESET» button on the remote (See page 29).
AUTO STANDBY FEATURE
If no signal is received for 15 minutes, the speakers will automatically switch to standby. To exit the
standby mode, simply switch the speakers back on with the remote.
36