Triangle BOREA CONNECT Serie Mode D'emploi page 33

Connecting a turntable
USB-B
When connecting a turntable, the BOREA speaker MUST be powered off.
Turntable Without Phono Preamplifier
USB-B
If you have a turntable without a built-in phono preamplifier:
Î Connect the RCA cable from the turntable to the «PHONO IN» input on the speaker.
Î Connect the fork (also called ground cable) to the GND socket provided for this purpose on the
back of your powered speaker.
Î Press the PHONO button on the remote. The yellow indicator light indicates that the source is
on the «PHONO IN» input.
Î Your system is ready to operate.
33
EN