Triangle BOREA CONNECT Serie Mode D'emploi page 25

EN
CONNECTING THE SPEAKERS
The speakers must be interconnected with the speaker cable provided. (White cable mentioning
"High purity OFC Copper cable").
Ensure that the speaker connection polarity is correct: The red and black terminals on the passive
and active speakers must be connected respectively to each other. To help with the set-up, the
connection cable indicating "TRIANGLE High purity OFC Copper cable" is dedicated to the red
terminal (+).
To respect the stereophony, it is necessary to place the active speaker to the right of the listener
when facing the speakers.
* To check the polarity (+/-), use
the mark on the cable to assign
it to +(red) and place each end in
red binding posts.
Powering On
Once you have checked the amplifier on the active speaker is set to the "OFF" position, plug the
power cord into the designated input and into an AC power outlet. The speakers are then ready for
use and can be turned on.
1 2 3
25