Triangle BOREA CONNECT Serie Mode D'emploi page 31

Connection via HDMI
Sampling: 96KHZ/24BITS
The TV ARC input enables you to connect your speakers to your television. To do so:
Î Check that your TV and HDMI cable are compatible with HDMI ARC technology.
Î Connect your HDMI cable to the back of the active speaker and on your television, on the HDMI
ARC input.
Î In your TV settings, set the sound output to PCM (Stereo).
Î Select TV input from the TV ARC button on the remote control. The white indicator light indicates
that the source is on the «TV ARC» input.
Î Your system is ready to operate.
+
This connection will allow you to turn on your speakers at the same time as your TV and
adjust the volume with the TV remote control.*
Connection via USB cable
Sampling: 384KHZ/32BITS
The USB-B input allows you to connect your speakers to a computer. You can use a USB-A or USB-C
to USB-B type cable.
Î Connect the USB cable to the «USB» input then the other end to your device.
Î Select the USB input from the USB button on the remote control. The light blue indicator light
indicates that the source is on the «USB» input.
Î In the computer settings, select the «TRIANGLE BOREA CONNECT» speakers as the audio
output.
Î Your system is then ready to operate.
+
The USB input allows you to send your audio files with the highest quality.
USB-A
USB-A
USB-C
USB-C
*Compatibility may vary depending on TV models.
31
HDMI
USB-B
Or USB-B
USB-B
USB-B
EN