Publicité
Les langues disponibles
Les langues disponibles
7. CLEANING AND MAINTENANCE
Before any cleaning, make sure that
1.
The appliance is turned OFF.
2.
Disconnect power supply at source by removing plug from power outlet.
3.
Wait 30 minutes to let the appliance cool down.
4.
Once cooled down, your appliance is now ready for cleaning.
Regular Cleaning
5.
Do not use cleaning liquid or chemical sprays on the unit.
6.
To clean the exterior, use a clean, soft and lightly damp cloth to gently wipe off the dirt from the
surface of the unit. Be sure not to wet the heating element and the switches. Allow the unit to
dry completely before using it.
WARNING
DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE APPLIANCE AS THIS COULD CREATE A FIRE
OR ELECTRIC SHOCK HAZARD, OR DAMAGE THE UNIT.
1
Replace HEPA filter
1.
Hold and turn the top air inlet (HEPA filter cover) (1) counterclockwise to the unlocked position,
2.
Take air inlet (HEPA filter cover) (1) and replace the HEPA filter located inside the cover.
3.
Put the air inlet (HEPA filter cover) (1) back, turn it to the locked position to secure the cover.
Storage
1.
Perform the cleaning procedures described in "CLEANING AND MAINTENANCE"
2.
Wipe all parts dry.
3.
Pack the appliance in a plastic bag and store it in a cool, dry place.
2
NOTE: Replace the HEPA filter every 3-6 month, visually check the fil-
ter frequently, replace when it is dirty, or air flow is reduced. Contact
supplier for HEPA filter replacement.
59
EN
3
Publicité
