Sonnenkonig IBRIG Manuel D'instructions page 55

5. ASSEMBLY
Pedestal use Floor use
Assembly of the unit:
1. Remove the base (9) from the main unit by turning the base (9)
clockwise.
2. Set the base (9) on the floor. Insert one column (8) into the base (9)
and secure them by turning the column (8) clockwise. Insert the upper
column (7) into the top of the lower column (8) and secure them by
turning the upper column (7) clockwise.
3. Insert the main unit head into the top of the upper column (7) and
secure them by turning the main unit head clockwise.
NOTE
If used as tabletop unit, no assembly is needed. If used as floor unit,
only one column is needed, the two columns are same.
Tabletop use
55
EN