Publicité
Les langues disponibles
Les langues disponibles
1.
Power Button
• Press once: Turn the unit on (Default as fan mode)
• Press twice: Switch to heater mode
• Press third time: Turn the unit off (Unit will be delay off after 10 seconds)
2.
Oscillation button
• By pressing this button, turn the oscillation mode on, switch the oscillation angle and turn oscillation off.
• The digits on the display (7) shows the oscillation angle:
• 01------60 degree
• 02------90 degree
• 03------120 degree
3.
Timer button
• By pressing this button, turn the auto-off timer on, keep pressing the button to set the desired
auto-off timer (00-24 hour) in one hour interval. The timer will show on the display (8), flash for 3
seconds and back to room temperature display.
• 00 means the timer is off
• Press this button any time to check the current timer setting
4.
Power indicator
Red LED lights when the unit is plugged in.
5.
Fan mode icon
This icon shows the unit is running in fan mode
6.
Heater mode icon
This icon shows the unit is running in heater mode
7.
Mode, Speed display
• Speed in fan mode: 00-12, switch by pressing "+" or "-"
• Speed in heater mode: 00-06, switch by pressing "+" or "-"
• Oscillation angle: (See section 2)
8.
Room temperature, timer display
• By default, it will show room temperature.
• Timer: 00-24 hour (See section 3)
9.
Celsius icon
This icon shows the temperature display is in Celsius
10. Fahrenheit icon
This icon shows the temperature display is in Fahrenheit
11. Speed increase button
• By pressing this button, increase the speed in fan and heater mode (See section 7)
12. Speed decrease button
• By pressing this button, decrease the speed in fan and heater mode (See section 7)
13. Light button
• Press once: Turn the light on to high mode
• Press twice: Switch to light to low mode
• Press third time: Turn the light off
NOTE: The light can be controlled individually when the unit is off, as long as the unit is plugged to
power supply.
57
EN
Publicité
