Costway TQ10107US Mode D'emploi page 6

Attach the Front Wheel
Turn the vehicle body upright.
1.Raise up the vehicle body, insert the fork tube on the front wheel
assembly to make it pass through the hole in the bottom of the
vehicle body.
2.Plug the connector on the handlebar with the connector on the
vehicle body, and then hide the connectors into the hole of the
vehicle body.
3.Fit the handlebar into the fork tube on the front wheel assembly.
4.Align the holes on each side of the handle bar with the holes at
the front fork.
5.Fasten a Ø5 nut on the opposite end of the M5x35 machine screw
to secure the handle bar to the front fork.
10
Fork tube on the
front wheel assembly
Attach the Windshield
1.Plug the connector on the windshield in the connector on the
vehicle body. And hide connectors into the hole in the vehicle body.
2.Fit the windshield to the vehicle body.
3.Use a screwdriver to tighten two Ø4X16 screws to secure it.
EN
11