Costway TQ10107US Mode D'emploi page 5

2WD Attach the Rear Wheels
Inside of right rear wheel
Remove all the parts from the rear axle. Turn the vehicle body
upside down.
1.Slide the right rear wheel onto the rear axle from the left side of
the vehicle body, and make it match up with the motor on the
vehicle body.
2.Slide a Ø10 washer onto the rear axle.
3.Tighten a lock nut to the end of the rear axle with a spanner.
08
Gear box
Rear Bottom View
4.Slide the Ø10 washer on the other side of the rear axle.
5.Slide the left rear wheel onto the rear axle.
6.Slide another Ø10 washer onto the rear axle.
7.Tighten a lock nut to the end of the rear axle with a spanner.
TIP: An extra spanner has been provided to hold the Lock Nut on
the other side of the rear axle while tightening the Lock Nut on the
other side.
8.Fit the hubcaps to the both rear wheels.
2WD Attach the Rear Wheels
Gearbox L
EN
Inside of left rear wheel
09