Hurricane™ 1101 QRG
To Begin
Remote or
Manual
Operation
Description
Overview
AC Power
Fuse
Replacement
Manual Fog
Controller
(FC-M)
All manuals and user guides at all-guides.com
Unpack your Hurricane™ 1101 and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The Hurricane™ 1101 can be operated manually, or with the included
manual fog controller. Two other optional remote controls are also available:
a timer remote (FC-T) and a wireless remote (FC-W). Details can be found
in the User Manual, available at www.chauvetighting.com.
The Hurricane™ 1101 is a compact and lightweight fog machine that emits
thick bursts of water-based fog.
Manual Fog Button
Manual
Controller
Socket
Wireless
Controller
Socket
Power Input
(hardwired)
This product has a fixed voltage power supply and it can work with an input
voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the
specific model.
1. Disconnect the product from power.
2. Twist the fuse holder cap counterclockwise to loosen the fuse holder and
pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
1. Connect the fog machine to power.
2. Plug the manual fog controller (FC-M) into the Manual Controller socket
on the back of the fog machine.
3. Press the button located on the controller to trigger the fog output.
The FC-M button is momentary, which means that the fog machine will
only output while the button is pressed. Once the button is released, the
fog will stop outputting.
Low-Fluid Indicator
Fuse Holder
3
EN
Fog Fluid
Tank
Fluid Level
Indicator
Back Panel View