Replace The Control Unit; Important; Spare Parts; Accessories - Franke AQFU0005 Notice De Montage Et De Mise En Service

17. Replace the control unit

17.1 Remove the housing (see
17.2 Lever the battery compartment (a) out of the holder.
17.3 Loosen the nut (b), using an open-ended wrench.
17.4 Remove the control unit (c) by pulling it downwards.
☞

Important!

The solenoid valve must be connected before the power supply is connected.
17.5 Reassemble in reverse order.

18. Spare parts

Description
1 Solenoid valve cartridge . . . . . . . . 2030003033
2 Control unit . . . . . . . . . . . . . . . . . . 2030004490
3 Spare parts kit consisting of:
Non-return valve
Seals . . . . . . . . . . . . . . . . . . . . 2030004491
4 Lithium battery 6 V,
Type CRP2. . . . . . . . . . . . . . . . 2000104846
chapter 13.).
Order No.
5 Special wrench . . . . . . . . . . . . . . . 2000105636
6 Remote control . . . . . . . . . . . . . . . 2000101087

Accessories

Stainless steel care product
CHROMOL 0.5 l . . . . . . . . . . . 2000105091
Stainless steel care set, complete
CHROMOL 0.5 l
Sanding sponge, coarse
Sanding sponge, fine . . . . . . . 2000109019
Order No.
9