ResMed AutoSet CS 2 Mode D'emploi page 20

4 Connect the free end of the medium air tubing to the A
Connect the pressure sensor tube by twisting the Luer lock onto the A
(see page 12).
Connect the mask system to the free end of the long air tubing. The final assembly
5
should look like this:
Switch on the
6
WARNING
!
Make sure that the power cords and plugs are in good condition and the equipment
is not damaged.
Perform the Air Circuit Learn function (see page 26).
7
For information about filling and maintaining your humidifier, refer to the HumidAire
User's Manual.
The A
on page 21.
16
Get user manuals: See SafeManuals.com
and the A
H A
UMID IRE
CS2 is now ready for use with the
S
UTO ET
UTO
S CS2.
UTO ET
. See "Starting Treatment"
H A
UMID IRE
S CS2.
ET
S CS2
UTO ET