Ego Power+ ZT4200L Mode D'emploi page 72

LCD
Description
Display
OFF Charging Port Fault
see "Fault
Charging Port Fault
code"
see "Fault
Battery Box Assembly not
code" functioning.
see "Fault
Start/stop Switch Fault
code"
see "Fault
LCD Screen Fault
code"
72
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC
Mower
Fault code
Status
on LCD
Indicator
n/a Solid RED
n/a Solid RED
n/a Solid RED
204 n/a
217 n/a
310/410 OFF
201/202/203 OFF
314/414 OFF
315/415 OFF
Audio
Cause
Indicator
The charging
n/a port is in open
circuit.
There is no
n/a
power supply.
The fuse is
n/a
blown.
The charging
one beep port is in open
circuit.
The power
source from
Battery Box
assembly is
one beep
broken. The LED
headlights and
USB wiil not
work.
The connection
between Type C
wires of Battery
Box assembly
one beep
and other Type
C wires of the
mower is out of
work.
The BMS of
the Battery Box
one beep
assembly is
broken.
Switch PCBA
failure or bad
one beep wire connection
for Start/stop
Switch.
LCD assembly
is broken or bad
one beep wire connec-
tion of the LCD
assembly.
Solution
Have repairs performed by a qualified
service technician.
Check the wall outlet whether there is
120V supplied or the socket is good.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.