Publicité
Les langues disponibles
Les langues disponibles
LCD
Description
Display
The auto-parking icon
blinks on the LCD
Brake pedal icon is dis-
played on the LCD
Seat sensor icon is dis-
played on the LCD
PTO Switch icon blinks
Lap bar icon blinks
Energy regeneration icon
blinks occasionally.
68
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC
Mower
Fault code
Status
on LCD
Indicator
n/a
OFF
n/a
OFF
n/a
OFF
n/a
OFF
n/a
OFF
n/a
OFF
Audio
Cause
Indicator
The mower is
parked on a
slope and the
operator leaves
the mower
without setting
Keeps
the parking-
beeping
brake pedal
at the braking
position, just
with the lap
bars in the open
position.
The parking-
brake pedal is
No
set at the brak-
ing position.
The operator
leaves the seat
No
or seat switch
is disconnected.
The blade motor
was interrupted
in operation and
No
the PTO switch
is not set to off
position.
The driving
motor was
interrupted in
No
operation and
the lap bars are
not set to open
position.
The kinetic
energy gener-
ated during
braking or
No
driving downhill
is converted
into electricity
to charge the
battery packs.
Solution
Set the brake pedal at the braking
position. The auto-parking icon will be
off and the sound indicator will stop
beeping.
Release it before starting the mower.
If with the operator seated on the
seat, the icon is on, stop operating the
mower immediately and check the
seat connection. If the seat connection
with the mower is confirmed correct,
please contact a qualified service
technician for repairs.
Before restarting the mower, push the
PTO switch downward to disengage
the deck motor. Please see "TROU-
BLESHOOTING" section in this manual
for reference.
Before restart the mower, move the
lap bars to the open position. Please
see "TROUBLESHOOTING" section in
this manual for reference.
This is normal operation. No action is
needed.
Publicité
