Publicité
Les langues disponibles
Les langues disponibles
FAULT CODE & MOWER STATUS INDICATOR REFERENCE
LCD
Description
Display
Safety key icon blinks
The icon of a certain bat-
tery compartment blinks
The icon of the empty bat-
tery compartment blinks
The overload indicator
blinks
The icon of the thermom-
eter blinks.
66
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC
Mower
Fault code
Status
on LCD
Indicator
n/a
OFF
n/a
n/a
n/a
OFF
n/a
Flashes red One beep
n/a
Flashes red One beep
Audio
Cause
Indicator
The safety key
is not inserted.
No
Key Control
Panel Box
Assembly is
broken.
A certain bat-
tery during
No
discharging is
over-current.
Battery capacity
is not sufficient
No
to allow the ride
on mower to
work.
The blade motor
is overloaded.
The side
discharge chute
is clogged
with grass and
debris.
There is an
interference
between the
blade and the
mower deck.
The mower is
overheated.
Solution
Insert the safety key then press and
hold the START/STOP button for more
than 3 seconds to turn on the mower.
Have repairs performed by a qualified
service technician.
No action is needed. The mower can
continue working if the combined
battery Ah rating, over-current battery
excluded, is equal to or more than
15Ah. Once the over-current battery
returns to normal, it will join in power-
ing the mower immediately and the
icon will disappear.
In order to start this mower, EGO
batteries totaling 15Ah (2 X BA4200/
BA4200T) or more are required. For
best performance, we recommend
use of EGO batteries that total 30Ah
or more.
Raise the deck cutting height or slow
the driving speed to reduce the load of
the mower.
Clean the side discharge chute after
each use.
Call EGO Customer Service Center
Reduce the load of the mower by rais-
ing the deck cutting height or slowing
down the blade/driving speed. Take a
break and allow the mower to cool.
Publicité
