Publicité
Les langues disponibles
Les langues disponibles
A
D
A Power Button
Press once to turn on. Press and hold for three
seconds to turn off. Button will glow blue if unit is
connected to a power source.
B "P" Set Button
Use this button when the Controller Knob is set to
the lowest temperature setting. The "P" Setting
directly controls the cycle rate of the auger feeding
pellets to the burn pot.
C
Controller Knob
Increase or decrease the temperature value. Push
to activate a value change, rotate to select value,
then push again to select/accept new value.
D Prime Button
Press and hold to activate an extra feed of pellets
to the burn pot.
E
Meat Probe Connection Ports
Plug-in the adapter end of a meat probe to a
connection port. The readout will appear on the
display screen for the corresponding meat probe
selected.
F
TARGET Temperature
Displays the desired target temperature. This is
the temperature that is selected by turning the
Controller Knob.
WWW.PITBOSS-GRILLS.COM
CONTROL BOARD
B
E
F
K
G "P" SET Cycle
Displays the "P" Set cycle rate chosen. The cycle
rate is selected by lightly pushing the "P" Set
button, cycling from P0 to P7.
H ACTUAL Temperature
Displays the Actual temperature from inside the
main barrel. Readout is taken by the grill probe
(sensor).
I
Fire Intensity Meter
Displays the Actual temperature intensity of
the fire in the burn pot, changing from blue to
red. The color changes when the desired Target
temperature is adjusted.
J
Operation Icons
A solid icon is visible when a part is in operation.
When an icon is flashing, an error has occurred.
See Troubleshooting for assistance.
K Meat Probe Readouts
Displays the temperature reading of the meat
probe (or probes) that are connected. The readout
corresponds with the plug-in connection port
selected.
C
G
H
I
J
7
HAVE A
QUESTION?
Check out some
common FAQs online
or Live Chat with
Customer Care.
PIT BOSS® GRILLS
Publicité
