American Standard Cadet A5350110020 Instructions D'installation page 4

INSTALLATION #3 - BOTTOM MOUNT WITH ZIP NUTS
Side view of the toilet seat installation parts.
Zip nuts - See below
2
The installation kit includes two sets of stainless
washers: 2 with center holes and 2 with offset
holes. The offset washers hole can be set
forward or back allowing the seat to be moved
back from or to the forward edge of the bowl rim.
TANK
To Move
Seat Forward
FRONT OF BOWL
5
Bowl
When closed nuts lock
onto threads allowing
final tightening with
screwdriver or supplied
attachment handles.
8
REMOVAL
Bowl
1
Under Hinge
Attach hinge gaskets to bottom of hinge base.
Make sure alignment tabs on hinge gaskets
match the slots under the hinge base.
3
To Move
Seat Back
When the seat is properly aligned with the
front edge of the bowl, slip the bolt through
the washer and the bowl bolt holes.
6
The hinge cap covers are designed to snap
lock on to the hinge. Position the hinge
covers and push down on the cover.
9
REMOVAL
Bowl
Slot Alignment
Tab
Hinge
Base Gasket
Page 3
Align hinges over holes on toilet bowl.
4
Bowl
When opened, nuts can slip over
threads for rapid installation.
7
Tighten the bolts using a screwdriver.
10
REMOVAL
7302106-100 Rev. D 7/15