WIKA GDT-20 Mode D'emploi page 46

8. Dismounting, return and disposal
8. Dismounting, return and disposal
EN
8.1 Dismounting
When removing the instrument, the force required to do this must not be applied through
the case, but only through the spanner flats provided for this purpose and using a suita-
ble tool (see chapter 5.1.3 "Installing the instrument").
Only disconnect the transmitter once the system has been depressurised!
8.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
When returning the instrument, use the original packaging or a suitable transport
packaging.
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
46
WARNING!
Residual media in the dismounted transmitter can result in a risk to
persons, the environment and equipment.
▶
Take sufficient precautionary measures.
Information on returns can be found under the heading "Service" on our
local website.
Do not dispose of with household waste. Ensure a proper disposal in
accordance with national regulations.
WIKA operating instructions transmitter, models GDT-20 and GDHT-20