American Standard 2794.709 Mode D'emploi page 5

11
Operating the Touchless Flush
Simple hand wave over sensor face within 1-1/2
inch distance for two seconds triggers a powerful
flush for a more hygienic bathroom experience.
The 2-1/2 inch diameter, adhesive tape backed
sensor module is supplied with mounting screws
and can be installed on the wall within 3 feet of
the toilet or on top of the toilet tank itself.
Please utilize the included signage should you feel it necessary to communicate to users how to activate
the hygienic touchless flush. The signage can be affixed to the top of the tank or around the flush actuator.
Example: on tank cover
12
Press and hold push button actuator on left
side of tank for two seconds to induce manual
flush in the event batteries need replacing.
Example: around the flushing actuator on wall
- 5 -
7302484-100 Rev. 4 9/22