Publicité
Les langues disponibles
Les langues disponibles
Wax Ring
(Included with retail model
780AA.709 and 580AA.709)
BEFORE YOU START: Please see specificaton sheet for rough-in information
Turn Off Water Supply
Recommended fitting type for
back-to-back installations.
INSTALLATION INSTRUCTIONS:
1
NOTE: T Bolts with retainer included.
SOLD SEPARATELY
Water Supply Line
If Removing An Existing Toilet
Flush to remove
water from tank;
sponge remaining
water from
bowl before
removing toilet.
Depending upon your plumbing and venting conditions, the flow from the
toilet in a back-to-back installation may create a vacuum on the system
and draw water from the opposing bowl. The National Standards Plumbing
Code prohibits the use of a cross fitting for drainage as throw over is
possible. The code does approve a directional "Y" style fitting with proper
venting to direct the water downward and away from the other toilet.
- 2 -
Clean Flange
BACK-TO-BACK INSTALLATION
2
Press firmly.
NOTE: Bowl with exposed trapway shown.
Slow Close Toilet Seat
(Included with concealed trap
toilets and retail models
780AA.709 and 580AA.709 only)
Caution: If leaving floor flange
!
open for more than 1-2 hours,
cover flange to prevent escaping
sewer gases.
Wax Ring
(Included with retail
models 780AA.709
and 580AA.709 only.)
7302484-100 Rev. 4 9/22
Publicité
