American Standard 2794.709 Mode D'emploi page 4

Water Supply
Hose Nut
Manual Flush
Button / Assembly
AA Battery Pack
Hand Sensor
Module
9
a. Remove plastic Flush Control
Module / Battery Pack Clip from
box, snap and place over
"Flush Valve In-Line Filter" area.
b. Remove Flush Control
Module / Battery Pack from box
and follow procedure in
"Operational Guide" , steps 4 to 9
under "Changing Batteries /
Flush Control Module in Tank to
add batteries to module.
(ref illustration from attached
drawing)
Flush Valve Flush Control
In-Line Filter Tower
Water Lever
Adjustment Screw
Hand Sensor
LED Light
Flush Control
Module/Battery
Pack Clip
Refill Tube / Overflow
Flush Control
Cable
Flush Control
Cable Connector
10
Flush Control
Module/Battery
Pack
- 4 -
Flush Control
Cable Connector
AA BATTERY PACK
Flush Control Module
Remove Hand Sensor Module from
box and follow procedure in
"Operational Guide" , steps 1 to 3
under "Changing Batteries / Hand
Sensor Module" , while also referencing
the NOTES portion at the end.
Also reference under the "Operational
Guide" , "Installation of Hand Sensor
Module" , for preferable locations to
mount the Hand Sensor Module.
Hand Sensor Module
7302484-100 Rev. 4 9/22